Bauer Supreme 1S Senior Goalie Blocker
Bauer pulled out all the stops building the Od1n line, and it doesn't take long to see the impact it has had on the pads.
Starting with their flagship hydrophobic technology, Bauer infused the mitt with moisture wicking fabric that also, regulates body temperature and keeps your hand dry and in slip free for complete control. 37.5 technology is infused with heat sensitive particles that draw sweat off the fabric and evaporate it as your body temperature rises making it up to 5x more effective than many comparable hydrophobic fabrics. This results in your body carrying less weight and expending less energy cooling, enabling increased performance across the board.
Curv Composite Blocker Board
You're probably familiar with Bauer's Curv Composite and the extreme rigidity they have achieved in their skates, well get ready to see the same transformation in your blocker! By reinforcing the Board with composite the area becomes much stiffer, improving the impact protection, and improved durability at a lighter weight.
Digitally Printed Graphics
A digitally printed graphic results in a more detailed, and more importantly cleaner finish. Devoid of seams and surplus material, Bauer eliminated the increased friction and less consistent surface, truly putting performance first.
XRD Foam Palm
Bauer's Poron XRD Foam is their leader in impact protection, and is lightweight and comfortable to boot. The foam is dependent on the reaction of urethane molecules when stressed ar a high rate, or impacted quickly. When this happens, the urethane molecules temporarily "freeze" forming a protective shell that has conformed to your body.
AX Suede Quattro+ Pro Palm
The premier palming material used by Bauer, the AX Suede Quattro+ provides superior soft stick feel, without wearing away.
Removable Finger Flap and Max Coverage Side Hand Protection
Customize your coverage! Bauer put every effort into providing full coverage protection in their 1S blocker, and in doing so they realized perhaps they over did it in some areas. So they give you the option to have every degree of protection for your index, or to focus on playability and feel by removing the insert.
For custom orders please feel free to contact D.J. at [email protected] for assistance.
Measure your hand from the heel of the palm to the tip of the middle finger, then consult the chart below to find the size that will work for you.
|Blocker Sizing Chart
|4 3/4 - 5 5/8 in.
||5 5/8 - 6 1/4 in.
||6 1/4 - 7 in.
||7 - 8 3/8 in.
|119 - 143 cm
||144 - 160 cm
||161 - 178 cm
||179 - 213 cm
Key to a Proper Fit:
The blocker should be fitted based on hand size. The goalie's fingers should be no more than 1/4" from the end of the fingers in the palm. If the fingers are too long, chances are the hand tabs that tie down the palm to the blocker are too large. This will cause the blocker to wobble, tilt or rotate on the goaltender's hand, seriously affecting control while limiting coverage (blocking surface).