Defend the corners with the REACTOR 7000 blocker, designed for quickness and protection. The lightweight construction is beveled at the top and bottom, creating both a tight seal on the ice and the ability to deflect pucks where intended. Maximum coverage defends the side of the hand and a soft nash palm provides an extra layer of reinforcement.
Measure your hand from the heel of the palm to the tip of the middle finger, then consult the chart below to find the size that will work for you.
| Blocker Sizing Chart |
| YOUTH |
JUNIOR |
INTERMEDIATE |
SENIOR |
| 4 3/4 - 5 5/8 in. |
5 5/8 - 6 1/4 in. |
6 1/4 - 7 in. |
7 - 8 3/8 in. |
| 119 - 143 cm |
144 - 160 cm |
161 - 178 cm |
179 - 213 cm |
Key to a Proper Fit:
The blocker should be fitted based on hand size. The goalie's fingers should be no more than 1/4" from the end of the fingers in the palm. If the fingers are too long, chances are the hand tabs that tie down the palm to the blocker are too large. This will cause the blocker to wobble, tilt or rotate on the goaltender's hand, seriously affecting control while limiting coverage (blocking surface).